Serving the Fort Collins area  ·  (970) 545-8912  ·  Open Mon-Sun 7am-7pm
📞 (970) 545-8912 Free Quote

Metal Roofing in Wellington, CO (80549) · Local Professionals

Fort Collins Metal Roofing · Fast response in Wellington and the Fort Collins area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Wellington is a small town with a big mix of rooftops. You have older farmhouses and barns out toward County Road 9, newer subdivisions off Cleveland Avenue, and plenty of homes on larger lots where the wind comes off the plains and hits the roof with nothing to stop it. That mix of rural and residential is exactly why we stay busy here.

We are Fort Collins Metal Roofing, and we have been working roofs across Larimer County since 2009. Wellington homeowners call us because we know the difference between a barn roof that needs re-fastening and a two-story house that needs a full standing seam replacement. We are based just south of you in Fort Collins, so we are not guessing about the weather or the building stock.

Metal Roofing in Wellington (80549)

Wellington sits at the northern edge of Larimer County where the plains start to roll toward the foothills. The wind here is not a rumor. It comes across open ground and works on every fastener, panel edge, and flashing detail. That is why we see so many screw-backed panel roofs in town that have backed out or wallowed out their holes after a few seasons. We also see a lot of older homes with low-slope porch roofs and outbuildings where the previous roof was nailed down and never had a chance against a good spring gust. Our crews handle Corrugated & Ribbed Panel Roofing and Screw Replacement & Re-Fastening as core work, not as an afterthought. We also deal with the freeze-thaw cycle at the eaves, where ice dams form on north-facing slopes and push water under the panels. And because Wellington has a lot of homes on well and septic, we are careful about where we stage materials and how we protect the ground around the house.

We have been serving Wellington and the surrounding Fort Collins area since 2009. We are a Metal Roofing Alliance Member, fully insured with general liability and workers' compensation, and we treat every property like it is our own.

Our services in Wellington

How a Job Works in Wellington

Step 1: You call us at (970) 545-8912 or send a message, and we set up a free on-site assessment. We walk the roof, check the fasteners, seams, and flashing, and look at the attic side if you have access. We give you a written estimate with the scope and the price, not a ballpark over the phone.

Step 2: Once you approve, we pull the paperwork and schedule the work. In Wellington, that often means coordinating with the Larimer County building department for the permit, and if you are in one of the newer subdivisions, we will work with your HOA on panel profile and color before we order material. Tight lot access on the older streets off Cleveland Avenue is common, so we plan where the dumpster and materials go before the crew shows up.

Step 3: We clean up every day and do a final walkthrough with you when the job is done. We magnet sweep for nails, haul away the old material, and make sure you know what was done and what to watch for. We leave your property clean.

Pricing in Wellington depends on the roof, not just the square footage. For a typical ranch or two-story home, metal roof installation starts around $8 per square foot, standing seam starts around $10 per square foot, and a full replacement starts around $9 per square foot. If you are going over existing shingles with a retrofit, that starts around $7 per square foot, but code limits how many layers you can cover, so we check that first. Repairs start around $450, screw replacement and re-fastening starts around $750, and flashing or chimney repair starts around $600. Snow guards start around $1,200. The main cost factors are roof size and pitch, access, the condition of the decking and flashing, and how fast you need it done. Call (970) 545-8912 for a free estimate.

✅ Metal Roofing Alliance Member, licensed and insured for work in Wellington and nearby areas.

My barn roof north of Wellington has screws backing out. Can you just re-fasten it or do I need a new roof?
In most cases we can re-fasten and replace the screws with larger, gasketed fasteners if the panels and washers are still sound. We check for wallowed-out holes and panel fatigue first. If the panels are cracked or the holes are too far gone, we will tell you straight and give you a replacement number. We do a lot of this work on outbuildings and shops in the 80549 area.
A storm just peeled back part of my roof in Wellington. How fast can you get out?
We prioritize active leaks and storm damage. Call (970) 545-8912 and we will schedule the soonest available inspection, often same day or next day depending on the season. We can tarp or secure the area to stop further damage and then give you a written repair estimate.
What does a metal roof cost for a typical Wellington house?
For a standard single-story or two-story home, most installations land between $8 and $10 per square foot for the roofing itself, with standing seam at the higher end. Repairs start around $450 and screw replacement starts around $750. The final number depends on roof size, pitch, access, and how much flashing and trim work is needed.
Do I need a permit for a metal roof in Wellington?
Roofing permits are commonly required for a full replacement or re-roof, and the rules vary by jurisdiction. We always check with the local building department before we start and handle the permit paperwork for you. You can also verify current requirements through the City of Wellington website at https://www.larimer.gov or by calling the county offices directly.
My neighbor says my new metal roof panels cross the property line. What do I do?
Property line issues come up on older lots in Wellington where the plat is not always clear. We recommend getting a survey if there is any question before work starts. If you are in an HOA, we will coordinate the design review and color approval with them so there are no surprises after the fact.
Are you insured for work on my Wellington property?
Yes. We carry general liability and workers' compensation insurance. We are happy to provide a certificate of insurance before we start so you have it on file.
What should I do to maintain my metal roof in Wellington between hail seasons?
Have the roof inspected after any major hail or wind event, and once a year in the spring. Check the fasteners on panel roofs, clear debris from the valleys and gutters, and look for any lifted flashing around chimneys and skylights. We offer free estimates for inspections and can catch small issues before they turn into leaks.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Fort Collins

All your work handled by qualified professionals in Fort Collins

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Fort Collins

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Fort Collins · Response within 24h · No commitment · ☎ (970) 545-8912

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Fort Collins ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm