Commercial & Agricultural Metal Roofing in Fort Collins, CO

Commercial & Agricultural Metal Roofing Fort Collins

Commercial & Agricultural Metal Roofing in Fort Collins: Built for Barns, Shops and Breweries

When you need Commercial & Agricultural Metal Roofing in Fort Collins, you need panels that shrug off hail, high-altitude sun, and wet spring snow, not a residential product stretched over a 6,000 sq ft shop. Fort Collins sits at about 5,000 feet where the Great Plains meet the foothills along the Cache la Poudre River, and the buildings here show it. East of town you have barns, grain bins and horse stables across Larimer and Weld counties. In town you have breweries, churches, retail shops and light industrial buildings with low-slope or steep-slope roofs that take a beating every hail season.

We have installed and repaired metal roofing since 2009, and we are a Metal Roofing Alliance Member. We work with exposed-fastener corrugated and ribbed panels, standing seam, and insulated panel systems on agricultural and commercial buildings. If you are pricing a new shop roof or chasing a leak over a horse stall, start with a free estimate and we will walk the roof with you.

Why Agricultural and Commercial Metal Roofing Matters in Fort Collins

Fort Collins weather is hard on low-slope and wide-span roofs. Spring and summer hail pounds panel surfaces and dents thin-gauge metal. Heavy wet snow loads wide barn roofs and pushes water uphill at seams. Downslope chinook winds work fasteners loose on exposed-fastener panels, and freeze-thaw winters open gaps at flashing and ridge caps. On top of that, wildfire risk from fires like Cameron Peak in 2020 means ember-resistant roof assemblies matter more than they did a decade ago.

Hail damage dents and fatigues thin panels, and Class 4 metal assemblies help commercial and ag buildings hold up season after season.
Screw back-out on exposed-fastener roofs lets water in at the fastener holes long before the panel itself fails.
Snow load and ice damming stress wide-span barn and shop roofs, especially where insulation is thin or missing.
Chinook wind uplift peels panels at the eaves and gable ends when fasteners and clips are undersized.
Condensation drips from the underside of bare metal panels and rusts equipment, hay and stored goods.

Most of the ag and commercial roof calls we get in Fort Collins trace back to one of those five failure modes, and each one has a different fix.

Key info: A horse stable outside Wellington and a brewery taproom in Fort Collins need different roof systems. The stable needs ventilation and condensation control. The taproom needs a clean standing seam profile and a Class 4 panel for insurance. We spec them differently.

Larimer County and City of Fort Collins building departments handle roofing permits for commercial and agricultural structures, and thresholds vary by jurisdiction. Check the Larimer County building department for current requirements before you schedule work.

How We Install and Repair Commercial and Ag Metal Roofs Around Fort Collins

Every job starts with a roof walk and a measurement, not a phone quote. We look at the existing deck, purlins, insulation, and flashing, and we check how the building sheds water. Then we match the panel system to the building use. A grain bin cover, a shop roof over a concrete slab, and a church steeple all get different treatment.

We inspect the roof, deck and fasteners, and we photograph problem areas for your records.
We measure spans, slope and penetration locations, then spec panel gauge, profile and insulation.
We pull the permit through the local building department and coordinate any historic or HOA review.
We remove or recover the old roof, repair decking and framing as needed, and install new underlayment or insulation.
We set panels, fasten or clip them to spec, and flash every penetration, curb and ridge.
We walk the finished roof with you, hand over documentation, and schedule follow-up if needed.

For buildings in the 80524 zip, including Old Town commercial properties and shops along the Poudre, we also handle the design review side when a historic district or HOA has a say in panel profile or color. See our Fort Collins 80524 commercial and agricultural metal roofing page for local detail.

Key info: Last spring we re-roofed a 4,800 sq ft shop east of Fort Collins near Eaton after hail dented the old 29-gauge panels. We went to 26-gauge ribbed panels with a Class 4 rating and added closure strips at the eaves to stop the wind-driven rain that had been soaking the insulation.

Approaches We Use for Commercial and Agricultural Metal Roofing

The right system depends on slope, span, budget and what happens under the roof. Here is how the main options compare for Fort Collins buildings.

Approach	Description	Best for
Exposed-fastener ribbed panels	Screws go through the panel into purlins or deck. Fast, affordable, and easy to repair.	Barns, shops, grain bins and outbuildings where budget matters most.
Standing seam	Concealed clips, raised seams, no exposed fasteners on the field of the roof.	Breweries, retail, churches and commercial buildings where looks and leak resistance both count.
Insulated metal panels	Factory foam core between metal skins controls condensation and adds R-value.	Stables, kennels, cold storage and shops where condensation ruins contents.
Retrofit over existing roof	New panels and purlins go over the old roof when code allows the layer count.	Commercial buildings where downtime and tear-off cost are the main concern.
Repair and re-fastening	We replace backed-out screws, reseal penetrations and replace damaged panels.	Roofs that are structurally sound but leaking at fasteners or flashing.

We will tell you when a repair makes more sense than a replacement, and when the panel gauge is too thin to save.

Commercial & Agricultural Metal Roofing Cost in Fort Collins: What to Expect

Commercial and ag metal roofing in Fort Collins is priced by the square (100 sq ft), and the range is wide because the buildings are so different. A simple 30x40 shop with a gable roof and exposed-fastener panels sits at the low end. A brewery with standing seam, insulation, snow guards and multiple penetrations sits at the high end. We start every project with a free estimate, and that number is the only one worth budgeting against.

Panel gauge and profile move the price more than anything else, since 26-gauge standing seam costs more than 29-gauge ribbed panels.
Roof size and pitch drive labor, and steep or complex roofs take longer and need more safety setup.
Tear-off and disposal add cost, especially on multi-layer roofs or where the old deck needs repair.
Insulation and condensation control add material cost but protect what is stored under the roof.
Penetrations and flashing (vents, curbs, skylights, chimneys) add labor at each location.
Access matters on rural Weld County sites, where a long driveway or soft ground changes how we stage materials.

Get two or three estimates and compare the panel gauge, fastener type and warranty, not just the bottom line. Our metal roofing pricing overview breaks down how we build a number.

What to Look for When Hiring a Metal Roofing Contractor Near Fort Collins

Hiring for a commercial or ag roof is different from hiring for a house. The building is bigger, the liability is higher, and a bad install shows up as a leak over equipment or livestock. Ask questions before you sign anything.

Confirm the contractor is licensed and insured, and ask for a certificate of insurance before work starts.
Get at least two or three written estimates that list panel gauge, fastener type and warranty terms.
Ask for references from commercial or agricultural buildings, not just houses, and call them.
Understand who pulls the permit and who handles inspection, since requirements vary by jurisdiction.
Check whether historic district or HOA design review applies to your building before you pick a panel color.

If a contractor will not put the panel gauge and fastener spec in writing, keep looking. Reach out through our contact page when you are ready to compare.

Commercial & Agricultural Metal Roofing Near Me: What Fort Collins Property Owners Should Know

When you search for commercial and agricultural metal roofing near me in Fort Collins, you will find plenty of contractors who mostly do houses. Ask whether they have worked on barns, stables and light commercial buildings, and ask how they handle condensation and ventilation. Those two issues cause more ag building problems than leaks do.

We work across Fort Collins, Loveland, Windsor, Greeley, Wellington and the surrounding plains and foothills. If your building is in Timnath, LaPorte or out toward Red Feather Lakes, we can get there. Call (970) 545-8912 and we will set up a roof walk.

Commercial & Agricultural Metal Roofing in Fort Collins: Pricing Guide

Service	Price	Details
Roof inspection and written estimate	Free	On-site roof walk, measurements and photos, with a written scope and panel spec, no obligation to book.
Exposed-fastener panel re-roof (shop or barn)	Starting at $4.50 per sq ft installed	Includes tear-off of one layer, new underlayment, 26-gauge ribbed panels and standard flashing.
Standing seam commercial roof	Starting at $9.00 per sq ft installed	Concealed-clip standing seam with insulation and custom flashing; price rises with pitch and penetrations.
Insulated metal panel system	On estimate	Foam-core panels need a look at purlin spacing, slope and condensation risk before we quote.
Repair and re-fastening	Starting at $450	Covers screw replacement, resealing penetrations and small panel repairs; larger damage priced after inspection.
Travel	Included	In Fort Collins and surrounding Larimer and Weld County areas, no separate call-out or mileage fee.

Indicative pricing, the exact cost depends on square footage, finish, and site access. Free personalized estimate within 24h at (970) 545-8912.

Commercial & Agricultural Metal Roofing: service areas

📍 Fort Collins 📍 Loveland 📍 Windsor 📍 Greeley 📍 Longmont 📍 Wellington 📍 Timnath 📍 LaPorte 📍 Bellvue 📍 Berthoud 📍 Estes Park 📍 Red Feather Lakes 📍 Johnstown 📍 Severance 📍 Evans 📍 Eaton 📍 Milliken 📍 Mead

Frequently asked questions: Commercial & Agricultural Metal Roofing in Fort Collins

How much does commercial and agricultural metal roofing cost in Fort Collins?

Most shop and barn re-roofs in the Fort Collins area land between $4.50 and $9.00 per square foot installed, depending on panel type. Exposed-fastener ribbed panels sit at the low end, and standing seam with insulation sits at the high end. Tear-off, deck repair and penetrations add to that. We give a free written estimate after a roof walk so you get a real number for your building.

Do you install metal roofing on barns and horse stables near Fort Collins?

Yes. Barns, stables and outbuildings are a big part of what we do across Larimer and Weld counties. For stables we pay close attention to condensation control and ventilation, because moisture dripping from a bare metal panel ruins hay and stresses horses. Insulated panels or a proper underlayment system usually solve it.

What gauge metal panel should I use on a commercial building in Fort Collins?

For most commercial and ag buildings we recommend 26-gauge panels or heavier. The 29-gauge panels common on big-box store roofs dent easily in Front Range hail and back out at the fasteners sooner. If your building is in a hail-prone area east of Fort Collins or near Windsor, the heavier gauge pays for itself. We spec gauge by building use and span.

How long does a commercial metal roof installation take in Fort Collins?

A 2,000 to 4,000 sq ft shop roof typically takes three to six working days once materials are on site. Larger buildings, steep pitches or complex flashing push that out. Weather delays happen in spring and summer hail season. We give you a schedule with the estimate and update you if it changes.

Do I need a permit for a metal roof on my barn or shop in Fort Collins?

Usually yes, though it depends on the structure and the jurisdiction. Larimer County and the City of Fort Collins each have their own thresholds, and agricultural exemptions exist but are narrower than people assume. We pull the permit and coordinate inspection as part of the job. Always confirm current rules with the local building department.

Can you put a metal roof over an existing shingle or metal roof on a commercial building?

Sometimes. Code limits how many existing layers a roof can carry, and the deck has to be sound. On commercial buildings a retrofit with new purlins over the old roof can save tear-off cost and downtime. We check the layer count and deck condition before recommending it. If the old roof is failing, tear-off is the better call.

What is the best time of year to install a commercial metal roof in Fort Collins?

Late spring through early fall is the busiest window because the weather cooperates and hail season drives demand. Winter installs are doable but slower, since heavy wet snow and freeze-thaw conditions limit roof access. The dominant failure mode here is hail damage to thin panels, so many property owners schedule replacement right after a storm. Book early in the season if you can.

Do you handle emergency metal roof repairs on commercial buildings in Fort Collins?

Yes. If a storm has opened a roof over equipment, livestock or inventory, call (970) 545-8912 and we will get out to assess it. We can tarp or patch to stop water intrusion first, then schedule the permanent repair. We prioritize buildings where water is actively causing damage.

Is the estimate really free and no-obligation?

Yes. We walk the roof, measure, photograph problem areas and give you a written scope with a price. There is no charge and no pressure to book. If a repair is the smarter call than a replacement, we will tell you that. You are free to compare our number with other estimates.

Are you licensed and insured for commercial metal roofing in Fort Collins?

Yes. We carry liability and workers compensation coverage, and we can provide a certificate of insurance before work starts. We have been installing and repairing metal roofing since 2009 and we are a Metal Roofing Alliance Member. Ask for the certificate any time, it is a normal request on commercial jobs.