Serving the Fort Collins area  ·  (970) 545-8912  ·  Open Mon-Sun 7am-7pm
📞 (970) 545-8912 Free Quote

Metal Roofing in Severance, CO (80550) · Local Professionals

Fort Collins Metal Roofing · Fast response in Severance and the Fort Collins area · Free estimate 24h

✅ Metal Roofing Alliance Member 🛡️ Licensed & Insured 💸 Free Quote 24h 🕐 Mon-Sun 7am-7pm
+12Verified Reviews
17Years in Business
4.9 ★Google Rating
24/7Available
✅ No hidden fees💳 Cards accepted🛡️ Licensed & Insured✅ Metal Roofing Alliance Member

Severance sits out on the open plains just east of I-25, where the wind has a straight shot at every roof and hail comes in sideways. Most of the housing here is newer single-family construction on generous lots, with a mix of farmsteads and small acreage properties that have been out here for decades. If your roof faces west toward the Front Range, it takes the full brunt of summer storms and winter chinooks.

That is why homeowners in 80550 call Fort Collins Metal Roofing. We have been working roofs across Larimer and Weld counties since 2009, and we know what Severance weather does to shingles and fasteners. Whether you are near Severance High School or out on a county road, we can get a free inspection scheduled and tell you straight what your roof needs.

Metal Roofing in Severance (80550)

Severance is flat, open, and exposed. There is not much tree cover to break the wind, and that means two things for your roof: fasteners work loose faster, and panels take a beating during hail season. The Front Range is one of the most hail-prone regions in the country, and Severance gets its share. We see wind-lifted panels, failed screws, and seams that separate after a good storm. On the older farmsteads and acreage properties, we also run into roof-over-shingle situations where the decking needs a close look before we add weight. Newer subdivisions often have tighter lot lines, so we plan panel staging and ladder placement carefully to keep the job clean and the neighbors happy.

Our team has been serving Severance and the surrounding Fort Collins area since 2009. We are a Metal Roofing Alliance member, fully insured with general liability and workers' compensation, and we handle everything from standing seam installation to leak repair and snow guards.

Our services in Severance

How a Job Works in Severance

Step 1: You call us at (970) 545-8912 or request a free estimate online. We schedule an on-site assessment, walk the roof, check the decking and flashing, and talk through your options. No pressure, no sales pitch. We give you a written estimate with clear pricing.

Step 2: Once you approve, we pull the required roofing permit through the local building department and coordinate any HOA design review if your neighborhood has one. On install day, our crew arrives with materials staged and gets to work. For standing seam or metal shingle, we protect your landscaping and keep the site organized. If your property has a steep grade or tight access, we plan for that upfront so there are no surprises.

Step 3: We clean up every day and do a final walkthrough with you. We haul away old materials, check the gutters and flashing, and make sure you know how to care for your new roof. We leave your property clean and your roof ready for the next storm.

Metal roofing in Severance runs a range depending on the material and scope. Corrugated and ribbed panel roofing starts around $5.50 per square foot, metal roof over shingles (retrofit) starts at $7 per square foot, and standing seam starts at $10 per square foot. Metal shingle and stone-coated steel start at $9 per square foot. Repairs start at $450, screw replacement and re-fastening at $750, and snow guards start at $1,200. The final price depends on roof size, pitch, access, condition of the decking, and how quickly you need it done. We give free estimates, so call (970) 545-8912 and we will get you a real number.

✅ Metal Roofing Alliance Member, licensed and insured for work in Severance and nearby areas.

My house is in the newer part of Severance near Severance High School, and the roof faces west. Is standing seam worth it here?
Yes, especially on west-facing roofs that take the afternoon sun and storm winds. Standing seam has concealed fasteners, so there are no screws to back out, and it handles hail better than exposed-fastener panels. It costs more upfront, but it lasts decades and often lowers insurance premiums after hail claims. We can walk your roof and give you a comparison.
A storm just peeled back some panels on my barn east of town. How fast can you get out to Severance?
We prioritize storm and wind damage calls. Call us at (970) 545-8912 and we will schedule a free inspection as soon as possible. We can tarp or secure the area if needed and give you a repair estimate on the spot.
What does a metal roof replacement cost for a typical 2,000 square foot house in Severance?
For a standard single-story or two-story home, most replacements fall between $12,000 and $22,000 depending on the material. Standing seam is at the higher end, corrugated panels at the lower end. Access, decking condition, and whether we remove the old roof all affect the price. We provide a free estimate with a firm number.
Do I need a permit to replace my roof in Severance, and who handles it?
Roofing permits are commonly required for a full replacement or re-roof, and requirements can vary. We handle the permit process for you and make sure the work meets local code. For specifics on your property, check with the City of Severance website or call the building department. We will walk you through what is needed.
My HOA has rules about roof color and panel style. Can you help with approval?
Yes. We work with HOAs in Severance and the surrounding area regularly. We can provide product samples, color chips, and specification sheets for your HOA review. If there are property line or setback questions, we follow local rules and coordinate with you before any work begins.
Are you insured for work on my Severance property?
We are fully insured with general liability and workers' compensation coverage. We can provide a certificate of insurance before we start. Your property and our crew are protected.
What kind of maintenance does a metal roof need in Severance's climate?
Check fasteners and seals once a year, especially after hail season. Clear debris from gutters and valleys, and make sure snow guards are secure before winter. We offer inspections and maintenance plans to catch small issues before they become leaks.
Why choose us?

Trusted professionals since 2009

🏅

Licensed contractors

Continuous training, professional equipment, meticulous and code-compliant work

🛡️

Licensed & Insured

Full coverage on all our job sites, no exceptions

⚡

Available Mon-Sun 7am-7pm

Emergencies, weekends, holidays: available when you need us

💰

100% Free Quote

Response within 24h, no commitment, by phone or form

Our services

Our Metal Roofing Services in Fort Collins

All your work handled by qualified professionals in Fort Collins

Metal Roof Installation

Complete metal roof systems engineered for your local climate and built to outlast three shingle roofs.

Included in your service

  • Deck inspection and repair before any panel goes on
  • High-temp synthetic underlayment and correct ridge and soffit ventilation
  • Manufacturer-certified panel, trim, and flashing details for the full warranty
  • Free on-site assessment and written estimate within 24h
Learn more→

Standing Seam Metal Roofing

Concealed-fastener standing seam: no exposed screws to loosen, leak, or need re-torquing.

Included in your service

  • Panels roll-formed to the exact length of your roof, no end laps
  • Mechanically seamed or snap-lock profiles with concealed clips
  • Floating clip system that lets panels expand and contract freely
  • Kynar 500 / PVDF finish in the full architectural color range
Learn more→

Metal Roof Replacement

Full tear-off of an end-of-life shingle, cedar, or metal roof, replaced with a complete new system.

Included in your service

  • Tear-off and haul-away of the old roofing, dumpster included
  • Decking inspected board by board, rot and soft spots replaced
  • New underlayment, drip edge, valleys, and penetration flashing throughout
  • Documentation of the finished system for your insurer or future buyer
Learn more→

Metal Roof Over Shingles (Retrofit)

Retrofit metal installed over sound existing shingles: no tear-off, less waste, lower cost.

Included in your service

  • Honest deck and shingle assessment first, recover only when it is the right call
  • Furring strips or slip sheet as the panel profile and local code require
  • Existing vents, pipe boots, and flashings reworked to the new roof plane
  • Straight guidance on when tear-off is the better long-term choice
Learn more→

Metal Roof Repair

Targeted repair of damaged, loose, or storm-hit metal roofing before it reaches your ceiling.

Included in your service

  • Bent, dented, or punctured panels replaced and color-matched
  • Seams, laps, and penetrations resealed with compatible butyl and sealant
  • Failed pipe boots, closures, and ridge cap fasteners renewed
  • Written findings with photos of what we found and what we fixed
Learn more→

Metal Roof Leak Repair

Priority leak response: we trace the leak to its real source instead of caulking the symptom.

Included in your service

  • Water testing and interior tracing to find the true entry point
  • Backed-out fasteners, separated seams, and flashing gaps corrected at the cause
  • Emergency tarping available same day after a storm
  • Attic and insulation moisture check so hidden damage does not sit and spread
Learn more→

Screw Replacement & Re-Fastening

The top cause of leaks on 15 to 30 year old screw-down roofs, fixed for a fraction of replacement.

Included in your service

  • Every fastener replaced with oversized screws and new EPDM sealing washers
  • Dried-out washers and stripped holes addressed panel by panel
  • Ridge, eave, and sidewall closures renewed at the same time
  • Restores a watertight roof without replacing sound panels
Learn more→

Corrugated & Ribbed Panel Roofing

Corrugated, tuff-rib, and 5V panel roofing: the budget-friendly workhorse for homes and outbuildings.

Included in your service

  • Galvalume and painted steel panels cut to length on site
  • Correct screw pattern and torque so washers seat without over-driving
  • Foam and metal closures at ridge, eave, and rake to keep weather and pests out
  • Full color range for homes, cabins, barns, and workshops
Learn more→

Metal Shingle Roofing

The look of architectural shingle, slate, or shake with the lifespan and wind rating of steel.

Included in your service

  • Interlocking stamped steel or aluminum shingle panels
  • Walkable finished surface, easier to service than a standing seam field
  • Lightweight enough for retrofit over an existing roof structure
  • Profiles and colors that suit historic and HOA-governed neighborhoods
Learn more→

Stone-Coated Steel Roofing

Steel strength under a textured stone finish, with strong hail and wind performance.

Included in your service

  • Acrylic-bonded stone granule surface over structural steel
  • Battened or direct-to-deck installation depending on the profile
  • Class A fire rating and high impact resistance ratings
  • Tile, shake, and shingle textures for suburban and coastal homes alike
Learn more→

Copper & Specialty Metal Roofing

Copper, zinc, and aluminum for porches, bay windows, dormers, and full architectural roofs.

Included in your service

  • In-house fabrication of pans, valleys, and custom curved details
  • Soldered seams and joints where the detail calls for it
  • Isolation of dissimilar metals to prevent galvanic corrosion
  • A living patina that develops over decades of service
Learn more→

Metal Roof Coating & Painting

Restoration for faded, chalking, or surface-rusted metal, adding 10 to 15 years without replacement.

Included in your service

  • Wash, degrease, and mechanical prep of the entire panel surface
  • Rust treatment and primer on affected areas before topcoat
  • High-performance elastomeric or silicone coating system applied to spec
  • Honest assessment first: we say so when the roof is past coating
Learn more→

Flashing, Chimney & Skylight Repair

Flashing is the number one leak point on any metal roof, and it is what we fabricate best.

Included in your service

  • Custom bent step, counter, and apron flashing made in-house
  • Chimney crickets to shed water on the uphill side
  • Skylight curbs and head flashing rebuilt to the panel profile
  • Valley and wall transition details closed with matching trim
Learn more→

Snow Guards & Ice Protection

Snow retention that stops rooftop avalanches onto decks, gutters, walkways, and entryways.

Included in your service

  • Pad-style guards or continuous rail systems matched to your panel
  • Layout calculated from roof pitch, panel length, and local snow load
  • Clamp-on mounting on standing seam, no panel penetrations
  • Ice dam and eave detailing for higher-elevation homes
Learn more→

Storm & Wind Damage Repair

Wind, hail, and fallen-limb repair with thorough documentation and a straight repair-or-replace answer.

Included in your service

  • Free post-storm inspection with dated photo documentation
  • Emergency tarping and temporary weatherproofing when needed
  • A written report you can use when documenting your insurance claim
  • Honest assessment of repair versus replacement, with no pressure either way
Learn more→

Metal Roof Inspection

A written, no-obligation assessment of fastener condition, seams, flashing, and remaining service life.

Included in your service

  • Fastener, washer, and seam condition checked across the field
  • Flashing, penetrations, and closures inspected point by point
  • Coating wear, chalking, and corrosion graded panel by panel
  • Written report with photos and a straight answer on years remaining
Learn more→

Gutters for Metal Roofs

Gutters sized and hung correctly for metal roofing, where standard hangers and spacing do not work.

Included in your service

  • Seamless aluminum or half-round systems formed on site
  • Hanger placement and spacing matched to the panel profile
  • Oversized capacity and downspouts sized for heavy regional rainfall
  • Bracket spacing tightened for high-wind zones so storms do not tear the gutter off
Learn more→

Commercial & Agricultural Metal Roofing

Barns, workshops, churches, and light commercial metal roofing across the county.

Included in your service

  • Long-run panels for wide spans and low-slope structures
  • Purlin and framing attachment detailed for the building type
  • Insulation, vapor barrier, and condensation control options
  • Repairs and re-fastening for aging agricultural metal buildings
Learn more→
Verified client reviews

12+ Verified Client Reviews in Fort Collins

⭐⭐⭐⭐⭐ 4.9/5 · 12 verified Google reviews

Free Quote

Get Your Free Quote

Metal Roofing in Fort Collins · Response within 24h · No commitment · ☎ (970) 545-8912

Your Free Quote Request

Confidential · Response within 24h

✅ Free personalized estimate ⚡ Response within 24h 🛡️ Licensed & Insured 📍 On-site visits included in Fort Collins ✅ No hidden fees 🕐 Available Mon-Sun 7am-7pm